A modern contoured design . The Italian durable chaise lounge to relax on around properties, pool's tanning ledge or on the pool shelf. Engineered with LLDPE (linear low-density polyethylene) and achieved by expert rotational moulding.
In Water: To fill, remove two plugs in the bottom, flip the lounger and hold underwater; once it fills, the unit will remain in place on your in water pool shelf. (with acceptable chemical levels) up to 6 inches of depth or out of the water.
Windy location: Fill bottom with hose to desired level for use on extreme windy locations, patios or rooftops.
Maintenance: To remove dust and dirt from the plastic surfaces,
the product needs periodic cleaning with a damp cloth soaked in neutral liquid soap, better if diluted in water. Avoid the use of ethanol or any liquid containing, even in small amounts, acetone, trichloroethylene and ammonia (solvents in general).
Product Dimensions:
- UV protection
- 100% recyclable
- Solution dyed
- High degree of mechanical strength
- High resistance to impacts
- Commercial Grade
- Made In Italy
In Water: To fill, remove two plugs in the bottom, flip the lounger and hold underwater; once it fills, the unit will remain in place on your in water pool shelf. (with acceptable chemical levels) up to 6 inches of depth or out of the water.
Windy location: Fill bottom with hose to desired level for use on extreme windy locations, patios or rooftops.
Maintenance: To remove dust and dirt from the plastic surfaces,
the product needs periodic cleaning with a damp cloth soaked in neutral liquid soap, better if diluted in water. Avoid the use of ethanol or any liquid containing, even in small amounts, acetone, trichloroethylene and ammonia (solvents in general).
Product Dimensions:
- Length: 62”
- Back & Leg Width: 251/2”
- Seat Width: 271/2”
- Knee Bend Height From Ground: 91/2”
- Seat Back Height: 201/4”
- Lowest Point Of Seat From Ground: 3”
